How to maintain the service life of woodworking carving machines correctly is the key
Source：本站Time：2019/9/10 14:48:42
For the maintenance of woodworking carving machines, attention should be paid to daily cleaning and lubrication of machine components. When using woodworking carving machines, a considerable amount of dust and impurities will enter, causing high resistance in the transmission of screw bearings. The key is to lubricate the relevant components of the woodworking carving machine
& nbsp; (1) Lubrication parts of woodworking carving machine: X, Y, Z three-axis screws, smooth rod.
(2) Lubricating material for woodworking carving machine: a mixture of engine oil and butter, which is not easily too thick.
(3) Lubrication cycle of woodworking carving machine: It depends on the working environment and machine working time, usually cleaning up the debris after work every day. Perform monthly refueling of various parts and high-speed air lubrication.
(4) Lubrication method for woodworking carving machine: When lubricating the three-axis, a six proof wrench can be used to tighten the internal hexagonal screw on the coupling between the motor shaft and the screw head to prevent misalignment of the three-axis due to mechanical looseness.
(5) Lubrication steps for woodworking carving machine: Before lubrication, remove impurities from the lead screw, guide rail, and bearings. If there are any impurities that cannot be removed, they can be cleaned with gasoline. Then inject lubricating oil and gradually increase the speed for air travel, without placing the board, and run in the three-axis.