When using the edge inspection vibrating knife integrated machine, the following points should be noted: 1. The installation environment of the equipment should be kept flat, avoiding vibration and bumps. 2. Before starting up, check whether all components are normal, especially whether there are any abnormal sounds in the motor and transmission parts. At the same time, it is necessary to ensure that the working surface of the machine is smooth and free of debris. 3. Do not disassemble screws or adjust setting parameters randomly during use. If you need to change parameters, please contact personnel in a timely manner for operation. 4. It is necessary to choose the appropriate cutting speed and pressure according to different materials to prevent insufficient machining. 5. Overloading is strictly prohibited to avoid damaging the machine tool. 6. When leaving the equipment during work, remember to shut it down to prevent unexpected dangers. 7. Regularly maintain and clean the dust and lubricating grease in the fan and bearing parts. 8. It is necessary to observe the operating status of the industrial control computer and promptly handle and solve any problems encountered. 9. Proper protective measures should be taken. Do not wear labor protection sleeves and wear safety helmets in accordance with regulations. During the transportation process, it is also necessary to fix the position of the entire machine to avoid damaging the equipment. These are the precautions to be taken during the inspection of the vibrating knife. We hope the above information is helpful to you. Wishing you all the best!

{1}

{2}

{3}

{4}

{5}

{6}

{7}

{8}

{9}