The installation process of a vibration engraving machine generally includes the following steps:
1. Preparation: Clean the workbench to ensure it is flat and free of debris. Check if the power cord is intact and if the voltage meets the requirements.
2. Install the spindle: Insert the spindle into the spindle hole of the workbench to ensure its stability.
3. Install the tool: Install the tool on the spindle to ensure its stability.
4. Connect power supply: Insert the power cord into a power outlet, turn on the power switch, and check if the device is working properly.
5. Debugging equipment: Adjust the speed, depth, and other parameters of the equipment as needed to ensure that the carving effect meets the requirements.
6. Start carving: Fix the material to be carved on the workbench and start carving.
It should be noted that when installing and using a vibration engraving machine, relevant safety regulations should be followed to avoid accidents.